Alarmmate GSM Alarm System Manual de usuario descargar pdf (Pagina 16)

A Top Safety and Protection Solution Worldwide!

Page １５ of 32 Ver 1.0

1) The Nodes Type NC,NO,EOL should reference the wired input sensor type.

The Default is NC and all the inputs are shorted with wires. If you want to

contact the wired sensors, then please replace the short wires by wired

sensors directly. Please remain the no-use input in short-circuit with wires.

Please see 8.4 Install the Wired Sensors and Electricity equipments

2) Zones’ Attribute definition of the wired zone is the same as the wireless zone.

3) The unit can accept total 8 wired sensors to 8 wired zones; each zone can be

assigned one wired sensor, and renamed by SMS Command.

4) Wired Zone Serial Number, Default Zone Name and Zone Attributes Table.

Zone SN.

Default Zone Name

Default Zone Attribute

Outer Door Opened

Normal

Intrusion from Left Fence

Normal

Intrusion from Right Fence

Normal

Intrusion from Front Fence

Normal

Intrusion from Garden Fence

Normal

24Hours zone alarm

24-Hour zones, This attribute can not

be modified. In arm or disarm or stay

mode, once the sensor in these zones

triggered, will alarm immediately.

24Hours zone alarm

SOS Help!

SOS zone, The attribute can not be

modified. In arm or disarm or stay

mode, once the sensor in these zones

triggered, will alarm immediately, but

not drive the siren.

6.2.2.3 Basic Setting

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sin comentarios

Alarmmate GSM Alarm System Manual de usuario Pagina 16