Alarmmate GSM Alarm System Manual de usuario descargar pdf (Pagina 20)

A Top Safety and Protection Solution Worldwide!

Page １９ of 32 Ver 1.0

table. If the setup is successful, the system will return OK to confirm the

operation.

E.g.: Modify the first wireless zone name as Front Door Opened by Intruder! You should

edit a SMS Content: 1234#M01# Front Door Opened by Intruder!# ,the 1234 is the

password. Then send it to the SIM card Number.

For Wired Zone Name, the format is: Password+#+Z+Zone Serial

Number+#+New Zone Name+#. Characters for the zone name are 32. The

Zone Serial Number is 01~08 corresponding to the LCD Menu and 6.2.2.2

table. If setup successful, the system will return OK to confirm the operation.

E.g.: Modify the first wired zone name as Front Door Opened by Intruder! You should

edit a SMS Content: 1234#Z01# Front Door Opened by Intruder!# ,the 1234 is the

password. Then send it to the SIM card Number.

7. Operating Instructions

Tips!

The user can arm/disarm/Stay (Partial armed) by Remote controls, Keyboard or

SMS. The user can cancel the alarm by Remote Controls, Keyboard or SMS to

disarm. The user can switch the independent output relay on or off by SMS

Commands.

7.1 Arm or Disarm or Stay (Partial Arm, At House Arm) and Emergency

Alarm by remote controls

Press the button “ ” on the remote control or Press Arm button on the

keyboard then select Arm, the Control Unit enters arm status (delay time

according to the setting), the ICON will then be on. Under this status,

with any sensor triggered, the control unit will alarm. If the call is answered,

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

Alarmmate GSM Alarm System Manual de usuario Pagina 20